COMET TECH SYSTEMS

This system eliminates the risk of pulling drill rods or casing into the main winch, managing the winch hydraulic system to first slow the winch and then stop the winch at the top of the mast in the same position each and every time. Drillers spend hours running rods during a bit change, gazing skyward to judge where their pulling plug is in relation to the winch which is even more difficult at night, but not anymore. This task is managed by the drills PLC and only requires the driller to pull the lever full on to achieve a perfect and fast rod pull every time. The digital display in the panel will show the exact position of the pulling plug at all times in both winching up or down operations. The System maximises the winch speed throughout the process increasing productivity while creating a new level of safety. The system can also be retro-fitted to existing drills.

COMET TECH SYSTEMS

Tired of guessing overshot depth and marking cable as the drilling progresses? Comet Tech proudly presents the following add on kits for the UDR 1000 and 1200 drilling rigs.

Wireline winch depth counter which offers real time depth reading when lowering or lifting the overshot

Wireline winch depth counter and safety stop which offers real time depth reading when lowering or lifting the overshot. There is a buzzer alarm before the overshot reaches ground level. There is a safety stop which prevents overwinding if the winch is unattented.

Semi automated wireline winch which offers real time depth reading when lowering or lifting the overshot. Automated lowering and lifting functions to preset depth. There is a buzzer alarm before the overshot reaches ground level. Overshot lowering and lifting speed (m/min) display. Elapsed time display for lowering and lifting. Monitoring system which stops the lowering or lifting if the overshot gets stuck.